Get a quote
Materials About Get a quote

CNC Machining Guide — Design, Process & Cost | KUSLA

Engineering Knowledge Hub

CNC Machining Guide

From design rules to cost optimization — a structured knowledge base for engineers making CNC decisions. Built from 20 years of production machining experience across 200+ CNC machines.

19
Engineering guides
6
Topic areas
50+
Data tables included
ISO
Standards referenced

What This Hub Covers

  • Design rules for CNC — tolerances, undercuts, thin walls, chamfers, and DFM guidelines that reduce rework and tooling cost.
  • Process selection — milling vs turning, 3-axis vs 5-axis, and when each operation type applies to your geometry.
  • Material-specific machining data — cutting parameters, machinability ratings, and grade-by-grade comparisons for aluminum, steel, titanium, brass, copper, and engineering plastics.
  • Surface finish specifications — Ra/Rz charts, process-to-roughness mapping, and post-machining treatment selection.
  • Cost drivers and estimation — line-by-line cost breakdowns, tolerance-cost multipliers, and when to choose CNC over injection molding or 3D printing.

Design for CNC Machining

Every CNC project starts at the CAD screen. The design decisions you make before submitting a drawing — wall thickness, corner radii, hole depth ratios, feature tolerances — determine 60-80% of the final machining cost. These guides cover the geometry rules, edge treatments, and DFM principles that separate production-ready designs from parts that need requoting.

Comparison 5 min

Chamfer vs Fillet in CNC Machining

When to break an edge with a chamfer vs round it with a fillet — stress concentration, tooling access, and cost implications for each.

Read guide
Comparison 8 min

Counterbore vs Countersink

Dimensions, fastener compatibility, and CNC programming differences between counterbore and countersink hole features.

Read guide
Technical Guide 10 min

Undercut CNC Machining

Feature types, T-slot/lollipop tool selection matrix, 3-axis vs 5-axis decision tree, and tolerance achievability for internal undercuts.

Read guide
Technical Guide

CNC Machining Tolerances Guide

Standard vs precision tolerances by operation type, GD&T callouts, and cost multipliers for tighter specs.

Coming soon
DFM Guide

CNC DFM Design Guidelines

Wall thickness, pocket depth ratios, draft angles, and feature-to-tool access rules that reduce requotes.

Coming soon
Technical Guide

Thin Wall CNC Machining

Minimum wall thickness by material, workholding strategies, and multi-pass approaches to prevent deflection.

Coming soon

CNC Processes & Operations

Choosing between milling and turning — or between 3-axis and 5-axis — is a geometry-driven decision with direct cost consequences. A cylindrical shaft that runs on a lathe in 4 minutes takes 20 minutes on a mill. These guides break down each process by capability, cycle time, and the part geometries they handle best.

Comparison 12 min

CNC Milling vs Turning

Kinematics, tolerance capability, surface finish, and cost economics — with a geometry-first decision framework.

Read guide
Comparison

3-Axis vs 5-Axis CNC Machining

When indexed 5-axis saves setup time vs when 3-axis with refixturing costs less. Includes part complexity scoring.

Coming soon
Technical Guide

CNC Thread Machining Guide

Thread milling vs tapping vs single-point threading — process selection, thread standards, and pitch/diameter tables.

Coming soon
Technical Guide

CNC Lathe Operations Guide

Facing, boring, grooving, parting, and live-tooling operations on CNC turning centers.

Coming soon
Technical Guide

Knurling Process in CNC

Diamond vs straight knurl patterns, pitch selection, feed pressure, and dimensional growth compensation.

Coming soon

Material Selection for CNC

The material you specify determines machinability, cycle time, tool wear rate, and achievable surface finish — which together account for 30-50% of part cost. These guides compare alloys and polymers head-to-head with machining-specific data, not just datasheet properties. For the complete material library, visit the Materials Hub.

Deep Guide 11 min

Titanium CNC Machining Guide

Grade selection matrix, milling/turning parameters, tool/coating selection, coolant strategy, and 5 failure mode fixes.

Read guide
Comparison 9 min

6061 vs 7075 Aluminum

Strength, machinability, weldability, corrosion, and cost compared — with alloy selection by application use case.

Read guide
Comparison 10 min

2024 vs 7075 Aluminum

Fatigue life, stress corrosion cracking, temper states, and aerospace-grade selection criteria.

Read guide
Comparison 8 min

Titanium vs Aluminum

Weight-to-strength, thermal performance, corrosion resistance, and cost per machined part compared.

Read guide
Comparison 7 min

304 vs 316 Stainless Steel

Molybdenum content, pitting resistance, machining speed differences, and application-based grade selection.

Read guide
Comparison 7 min

Copper vs Brass

Conductivity, machinability ratings, chip formation behavior, and real cutting parameters for both alloy families.

Read guide
Comparison 7 min

Brass vs Bronze

Alloy composition, bearing properties, free-machining grades, and application selection between Cu-Zn and Cu-Sn families.

Read guide
Comparison 8 min

Polycarbonate vs Acrylic

Impact resistance, optical clarity, CNC feed rates, and when to choose each for transparent machined parts.

Read guide

Not sure which process or material fits your part?

Upload your CAD file — KUSLA engineers review geometry, material, and tolerance requirements, then recommend the optimal approach.

Get a free DFM review

Surface Finish & Post-Processing

Surface roughness is not just cosmetic — it drives seal performance, fatigue life, friction coefficients, and coating adhesion. These guides translate Ra/Rz specifications into machining operations, feed-rate predictions, and post-processing selection. For finishing service options, visit the Surface Finishing Hub.

Reference Chart 10 min

CNC Surface Finish Ra Chart

Ra by operation type, N-grade conversion table, feed-rate-to-Ra prediction formula (f²/32r), and cost multiplier data.

Read guide
Deep Guide

Anodizing Aluminum: Types & Selection Guide

Type I vs II vs III hardcoat — thickness, color range, corrosion protection, and when each type applies.

Coming soon
Technical Guide

Bead Blasting Surface Finish Guide

Media selection, pressure settings, achieved Ra range, and when bead blasting outperforms tumbling.

Coming soon

Cost & Prototyping Decisions

Understanding CNC cost structure lets you design parts that hit performance targets without overrunning budget. These guides break down quoting line items, show where tolerance tightening inflates price, and map the breakeven points between CNC, injection molding, and additive manufacturing.

Cost Analysis 11 min

CNC Machining Cost Estimation

Real quote line-by-line breakdown, tolerance-cost multiplier matrix, and a self-estimation worksheet for budgeting.

Read guide
Comparison 10 min

CNC Machining vs Injection Molding

Break-even volume analysis, tolerance comparison, design feature compatibility, and hybrid workflow decision tree.

Read guide
Comprehensive Guide

CNC Machining for Prototypes Guide

When CNC prototyping beats 3D printing, minimum viable quantity thresholds, and DFM shortcuts for rapid iteration.

Coming soon

Process Comparison

Head-to-head process comparisons help engineers pick the right manufacturing method before committing to tooling or quoting. Each guide compares precision, surface finish, cost per part, and geometric capability between two competing processes.

Comparison

EDM vs CNC Machining

Hardened steel capability, surface integrity, dimensional accuracy, and when wire/sinker EDM complements CNC.

Coming soon
Comparison

3D Printing vs CNC Machining

Geometric complexity, material properties, cost crossover volume, and decision framework by application.

Coming soon

Ready to machine your part?

Upload your CAD file for a detailed quote with DFM feedback within one business day.

Start your project
Scroll to Top